Flowtech Fluidpower Analyst Q&A: Outlook is improving & industrial markets will continue to recover (LON:FLO)

Flowtech Fluidpower plc (LON:FLO) is the topic of conversation when Zeus Capital’s Research Director Andy Hanson caught up with DirectorsTalk for an exclusive interview.


Q1: Flowtech Fluidpower issued a trading update ahead of the groups pre-lim results for April. Andy, how has the company fared during 2020?

A1: The honest answer is they fared really well but you have to take into the context of what’s happened in FY20 and it has been a story of two halves if you like.

The first half was really, really impacted by the initial lockdown in spring of last year and the second half, the recovery in the industrial markets in the UK has slowly come back to life, post that lockdown. Despite the subsequent lockdowns, we’ve continued to see a sort of steady recovery, which is promising.

Putting that in context so for the year revenues are down 15% but the split between first half and second half, the first half revenues were down almost 22% and in the second half they were down 8%. At the interims, we did get an indication of what the early part of Q3 was down, with July and August being down double digit 12% and 15% respectively.

So, extrapolating out those numbers suggests that the Q4 run rate was down very low single digit, and could even have been positive in December because of the weak comps that they had from the previous year so, I think the run rate coming into the end of the year has been good.

I’d also say they will be profitable this year when many businesses weren’t, they’ve continued to generate cash and the net debt profile of the business has come down substantially over the last 18 months or so. So, when you put that in the context of the Q2 revenues during that first lockdown being down 33%, to have come to that period and made a profit in the first half is quite impressive.

They’ve fared well, but they obviously haven’t come through unscathed from the pandemic, but I think in totality, you’d look here and say, they’ve done a really good job of dealing with it.

Q2: Just looking forward, it looks like things are picking up. How do you view the outlook?

A2: Well, the company hasn’t provided guidance for FY21 and that also means the dividend hasn’t been reinstated yet, but when we get the actual results in April, I would hope that the company is in a position to give us more clarity on that going forward.

I actually think the outlook is improving, I think with the liquidity being pumped into the markets at the moment, I think it will provide confidence as vaccines get rolled out, people will start spending again and I think the industrial markets will continue to recover.

I’m not saying there aren’t issues on the horizon, but I am actually quite bullish about the company and FY21.

Q3: With that in mind, then how you feel about Flowtech Fluidpower’s valuation?

A3: Well, it’s difficult at the moment, without any guidance in the market so there aren’t any forward-looking forecasts but if I look at FY19 actual performance, the shares are trading on about 9 times, actually lower than that currently.

So, assuming FY21 performance is anywhere near FY19, and FY19 wasn’t a fantastic year for the company, the shares look potentially very cheap, but obviously we’ll have to wait until guidance comes back into the market in April time.

Click to view all articles for the EPIC:
Or click to view the full company profile:
    Facebook
    Twitter
    LinkedIn
    Flowtech Fluidpower

    More articles like this

    Flowtech Fluidpower

    See the Future of Fluid Power Now

    The theme of the 12th International Fluid Power Conference—to be held March 9 to 11, 2020 in Dresden, Germany—may be “Future Technology,” but attendees will leave this event with things they’ll want to do immediately. That’s because

    Flowtech Fluidpower

    Pneumatic design 101: Go with the flow

    The benefits of pneumatic power can be realized by following some basic pneumatic design rules for specifying air preparation units, actuators and valves. Compressed air use by industrial machines is a close second to the use of

    Flowtech Fluidpower

    How to achieve safety in industrial hydraulics

    Safety is critical when operating hydraulic machinery, particularly with heavy weight presses that can easily cause a person harm. This is why our Josh Cosford tackles this topic regularly, because there is no such thing as

    Flowtech Fluidpower

    Beaumanor celebrates 45 years in business

    Beaumanor, who have wealth of experience in fluid power components, recently celebrated 45 years in business. They have put together a website highlighting their journey from 1974 to present day. In 2018, Beaumanor was acquired by

    Flowtech Fluidpower

    John Farmer takes on new role with Flowtech Fluidpower

    Following 20 years of service with Flowtechnology UK, previous managing director John Farmer has taken on the new role of Group commercial director with Flowtech Fluidpower PLC. Farmer joined FTUK as a sales representative for the

    Flowtech Fluidpower

    NFPA publishes 2019 update to Fluid Power Technology Roadmap

    A new publication, the 2019 NFPA Technology Roadmap: Improving the Design, Manufacture and Function of Fluid Power Components and Systems, has been published by the National Fluid Power Association. Copies can be downloaded after a brief registration

    Flowtech Fluidpower

    Electrohydraulic valves trim fuel consumption in cars by 20%

    It’s well understood that internal combustion engines require valves for intake of fresh air and discharge of exhaust gases. Today, mechanically driven camshafts are used to control the gas exchange valves of four-stroke engines. They are

    Flowtech Fluidpower

    Making progress with women in fluid power

    Last May, it felt like we broke records when we had more than 20 women attend our Women in Fluid Power panel discussion at our Fluid Power Technology Conference. And later that year, our sister publication

    Flowtech Fluidpower

    IFPS Resurrects Fluid Power Hall of Fame

    There seems to be a Hall of Fame for everything else, so why should fluid power be any different? I remember seeing a Fluid Power Hall of Fame plaque displayed at trade shows back in my

    Flowtech Fluidpower

    Then and Now: Looking Back/Forward 25 Years

    A careful look at the last 25 years in the fluid power industry reveals both exciting and distressing news. We tend to look at the ground immediately in front of us and seldom lift our eyes

    Flowtech Fluidpower

    How do you remove water from your hydraulic system?

    It’s common knowledge that particulate contamination is unwanted in hydraulic systems. Contamination in hydraulic oil can damage mobile and industrial machinery. Of as much concern should be water in oil, as it too can lead to

    Flowtech Fluidpower

    Inspiring our leaders through mentoring

    Despite its use in most industrial applications, fluid power is a relatively niche industry and retaining and sharing knowledge across the business is critical for our survival and growth. We buy reputable businesses; proven performers with

    Flowtech Fluidpower

    July 2019 Special Edition: 2019 Fluid Power Handbook

    BROADENING HYDRAULIC FLUID POWER KNOWLEDGE Welcome to the eighth edition of the Fluid Power Handbook. Every year, our editorial staff works hard to add to the detailed information we’ve already accumulated on hydraulic and pneumatic components

    Flowtech Fluidpower

    What is a relief valve?

    A relief valve is a device used to limit pressure in one or more locations in a hydraulic circuit. A relief valve uses a spool or poppet engaged to the closed position by a spring. A