Flowtech Fluidpower Analyst Q&A: Outlook is improving & industrial markets will continue to recover (LON:FLO)

Flowtech Fluidpower plc (LON:FLO) is the topic of conversation when Zeus Capital’s Research Director Andy Hanson caught up with DirectorsTalk for an exclusive interview.


Q1: Flowtech Fluidpower issued a trading update ahead of the groups pre-lim results for April. Andy, how has the company fared during 2020?

A1: The honest answer is they fared really well but you have to take into the context of what’s happened in FY20 and it has been a story of two halves if you like.

The first half was really, really impacted by the initial lockdown in spring of last year and the second half, the recovery in the industrial markets in the UK has slowly come back to life, post that lockdown. Despite the subsequent lockdowns, we’ve continued to see a sort of steady recovery, which is promising.

Putting that in context so for the year revenues are down 15% but the split between first half and second half, the first half revenues were down almost 22% and in the second half they were down 8%. At the interims, we did get an indication of what the early part of Q3 was down, with July and August being down double digit 12% and 15% respectively.

So, extrapolating out those numbers suggests that the Q4 run rate was down very low single digit, and could even have been positive in December because of the weak comps that they had from the previous year so, I think the run rate coming into the end of the year has been good.

I’d also say they will be profitable this year when many businesses weren’t, they’ve continued to generate cash and the net debt profile of the business has come down substantially over the last 18 months or so. So, when you put that in the context of the Q2 revenues during that first lockdown being down 33%, to have come to that period and made a profit in the first half is quite impressive.

They’ve fared well, but they obviously haven’t come through unscathed from the pandemic, but I think in totality, you’d look here and say, they’ve done a really good job of dealing with it.

Q2: Just looking forward, it looks like things are picking up. How do you view the outlook?

A2: Well, the company hasn’t provided guidance for FY21 and that also means the dividend hasn’t been reinstated yet, but when we get the actual results in April, I would hope that the company is in a position to give us more clarity on that going forward.

I actually think the outlook is improving, I think with the liquidity being pumped into the markets at the moment, I think it will provide confidence as vaccines get rolled out, people will start spending again and I think the industrial markets will continue to recover.

I’m not saying there aren’t issues on the horizon, but I am actually quite bullish about the company and FY21.

Q3: With that in mind, then how you feel about Flowtech Fluidpower’s valuation?

A3: Well, it’s difficult at the moment, without any guidance in the market so there aren’t any forward-looking forecasts but if I look at FY19 actual performance, the shares are trading on about 9 times, actually lower than that currently.

So, assuming FY21 performance is anywhere near FY19, and FY19 wasn’t a fantastic year for the company, the shares look potentially very cheap, but obviously we’ll have to wait until guidance comes back into the market in April time.

Click to view all articles for the EPIC:
Or click to view the full company profile:
    Facebook
    Twitter
    LinkedIn
    Flowtech Fluidpower

    More articles like this

    Flowtech Fluidpower

    Flowtech Fluidpower plc 2019 to date has been very encouraging

    Flowtech Fluidpower plc (LON: FLO), the leading specialist supplier of technical fluid power components and services announced today its preliminary unaudited results for the year ended 31 December 2018. Audited results for this period are expected to

    Flowtech Fluidpower

    Tracked Grinder Goes Where Others Can’t

    Dealing with scrap materials in forestry and construction sites is no different from any other process: You want the job done as quickly and economically as possible. Transporting debris to a landfill may be an option,

    Flowtech Fluidpower

    Fluid Power Hoists Prove Ideal for Marine Applications

    Hoists powered by hydraulics or compressed air provide power-dense, safe, and reliable handling and lifting in a broad range of marine industry applications around the world, including jack-up rigs, semi-submersible platforms, drill ships, and vessels used

    Flowtech Fluidpower

    Who are Flowtech Fluidpower?

    “A specialist fluid power Group, we provide ‘total fluid power solutions’, delivering technical products, design, manufacturing services, maintenance and support to distributors, equipment manufacturers and industrial users across the UK and overseas. Creating a specialist fluid

    Flowtech Fluidpower

    Transforming Our Thinking About: Energy Units

    We are taught to think of fluid power in terms of flow and pressure; flow is for velocity and pressure is for force. While this is true at the actuator (the motor or cylinder), the terminology

    Flowtech Fluidpower

    Two of a Kind: Masking Tape and Hydraulic Pumps

    A Cryptogram puzzle I was working on recently challenged readers to come up with 10 “adhesives” from given clues. I got nine of them—cement, glue, solder, etc. I finally got the last one by substituting known

    Flowtech Fluidpower

    Five Must-Knows for Successful Hydraulic Filter Sizing

    Every industry, machine, and component within a hydraulic system brings its own set of requirements, each affecting the other to eventually influence selection of a seemingly simple filter element. Before setting yourself up for unintentionally higher

    Flowtech Fluidpower

    Examples of Hydraulic System

    A hydraulic system will circulate incompressible hydraulic fluids from one part of the system to another through tubes/pipes for generating power. The hydraulic systems have many advantages over others like electric and pneumatic. Some advantages of

    Flowtech Fluidpower

    Hydraulic Cylinders Enable Artistic Architecture at University

    A massive engineering and design collaboration has brought the vision of world-renowned Spanish architect Santiago Calatrava Valls to life in Lakeland, Fla. The new Innovation, Science and Technology (IST) Building at Florida Polytechnic University will serve

    Flowtech Fluidpower

    Your Connection is Only as Good as its O-ring

    Consider a hydraulic fitting with a Buna-N O-ring that has been stored in a parts bin for who knows how long, probably years. As is often the case, it is no longer sealed in its original

    Flowtech Fluidpower

    Accumulators Help Upgrade Hoover Dam

    The main challenge for modernising and improving operation of Hoover Dam was to overhaul and upgrade a series of 50-ft-tall pressure-relief valves (PRVs) on turbines in the dam’s powerhouse and to convert them to a hydraulic

    Flowtech Fluidpower

    Flowtech Fluidpower Plc Expecting a solid start to 2019

    Flowtech Fluidpower Plc (LON:FLO), today announced the following unaudited update on its performance for the year ended 31 December 2018 and to the period up to this announcement: GROUP TRADING UPDATE AND FINANCIALS Revenue for the

    Flowtech Fluidpower

    Hydraulics Technology is Alive and Well, Thank You

    I have been doing hydraulic motion control projects for 35 years. During this time, I have seen pundits predict the imminent demise of the hydraulic industry. So why hasn’t it happened? The answer is simple. Advances

    Flowtech Fluidpower

    Specifying the Right Hydraulic Cylinder for the Right Job

    Hydraulic cylinders essentially convert fluid pressure and flow into force and linear motion. They are available in a wide range of styles, sizes, materials, and configurations. Many OEM engineers play it safe by over-engineering cylinder specifications.

    Flowtech Fluidpower

    Hydraulic Actuators Handle Heavy Doors

    Hydraulic systems are often the first choice for opening and closing gigantic one-piece doors used on airplane hangars, agricultural buildings, and structures requiring large openings. Sometimes exceeding 100 ft. in width and weighing well over 10,000