Emerging technologies in Energy Storage and the role of Vadnium Flow Batteries

Even with a relatively short duration of four hours, Li-ion batteries are anticipated by the US Department of Energy to replace gas “peaker” plants, which are typically used only to provide additional electricity during periods of peak demand. Replacing continuously operating baseload gas power plants is a more advanced task suited for longer-duration systems. In this field, pumped hydropower continues to dominate. Although it is a proven and mature technology, it is limited by geography, water availability, and environmental and cultural concerns. In the US, pumped hydropower still accounts for about 95% of all long-duration energy storage capacity.

New, more flexible, and location-agnostic technologies are emerging for long-duration energy storage, such as compressed air and thermal storage systems. Flow batteries are also part of this mix. They operate on the principle that two specialised fluids can generate electricity when in motion, flowing next to each other and separated by a thin membrane that enables ions to pass through.

In 2014, CleanTechnica noted some emerging flow battery technologies. We observed that flow batteries score points for longevity as they do not degrade over time like lithium-ion batteries, making them ideal for intermittent energy storage. They can sit idle for long periods without losing their charge and can be activated almost instantly when needed. Until recently, typical flow batteries were bulky, but more compact systems have been emerging along with lower costs.

Vanadium, an abundant metal commonly used in the steel and titanium industries, is among the substances favoured for flow batteries due to its abundance, non-toxicity, and relatively low cost. It can be mined or recovered from industrial waste and is found in various foods, including mushrooms and black pepper. Vanadium can exist in two ionic states, allowing it to be used in both fluids in flow batteries. However, developing a cost-effective energy storage system using vanadium is not simple, partly due to heat management issues and high manufacturing costs.

In 2020, the US Department of Energy launched the $20 million Energy Storage Grand Challenge to support innovations that reduce the cost of manufacturing flow batteries. The Department explained that manufacturing flow battery systems of sufficient size is necessary to meet the expected demand for stationary grid storage. The current sizes of flow battery cells, which demonstrate the most advanced materials and components, are significantly smaller than those needed for commercial use.

Ferro-Alloy Resources Ltd (LON:FAR) is developing the giant Balasausqandiq vanadium deposit in Kyzylordinskaya oblast of southern Kazakhstan. The ore at this deposit is unlike that of nearly all other primary vanadium deposits and is capable of being treated by a much lower cost process.

Click to view all articles for the EPIC:
Or click to view the full company profile:
Facebook
X
LinkedIn

More articles like this

Resurgence in ferroalloy industry drives growth opportunities

The ferroalloy industry is experiencing a resurgence, driven by increasing global demand for steel and high-performance alloys. As the backbone of modern infrastructure, steel production is crucial, and the essential role ferroalloys play in enhancing its

The promising future of Vanadium

Vanadium, a transition metal known for its versatility and impressive properties, is increasingly becoming a focal point in various industries. This element, found in minerals and fossil fuel deposits, plays a crucial role in steel production,

Vanadium in iron and steel

Iron and steel, comprising steel and pig iron, are alloys where iron and carbon are the primary elements. These materials are the most extensively used in industrial applications. Adding vanadium to steel significantly enhances its properties

The versatile and intriguing world of Vanadium

Vanadium, a transition metal with atomic number 23, might not be as well-known as some other elements, but it boasts a range of fascinating properties and applications. This element’s versatile uses in alloys and its role

The evolution and future growth of Vanadium Redox Flow Batteries

The evolution of the redox flow battery over several decades has seen various chemistries being developed, commercialized, or even abandoned due to factors such as poor electrochemical reversibility and cross-contamination of active species. The vanadium redox

Ferro-Alloy Resources Q1 2024 Production 160% higher than Q1 2023

Ferro-Alloy Resources Ltd (LON:FAR), the vanadium producer and developer of the large Balasausqandiq vanadium deposit in Southern Kazakhstan, has announced the production results of the Group’s existing operation for Q1 2024. Q1 Production Results 2023 2024 Q12023

The role of Vanadium in steel alloys

Iron and steel refer to steel and pig iron, both of which are alloys with iron and carbon as the main elements. Iron and steel are the most widely used metal materials in industry. When vanadium

Ferro-Alloy Resources Limited

Uses, properties, and sources of Vanadium

About 80% of the vanadium produced is used as a steel additive. Vanadium-steel alloys are very tough and are used for armour plate, axles, tools, piston rods and crankshafts. Less than 1% of vanadium, and as

Profitability of future Vanadium Redox Flow Batteries

Researchers in Italy have estimated the profitability of future vanadium redox flow batteries based on real device and market parameters and found that market evolutions are heading to much more competitive systems, with capital costs down

The potential of Flow Batteries for long-term energy storage

In the coming decades, renewable energy sources such as solar and wind will increasingly dominate the conventional power grid. Because those sources only generate electricity when it’s sunny or windy, ensuring a reliable grid—one that can